|
Cancel and Return to Message Board |
|
Original Message Part 135 operators who have aircraft with seating of 9 or less must also follow this FAR, which describes maintenance requirements. Note, it's maintenance to follow the "maintenance program" for an engine. So, if the manufacturers recommended maintenance program tells you how to maintain the engine oil, it is a maintenance function. Maintenance must be documented IAW FAR 43! § 135.421 Additional maintenance requirements.(a) Each certificate holder who operates an aircraft type certificated for a passenger seating configuration, excluding any pilot seat, of nine seats or less, must comply with the manufacturer's recommended maintenance programs, or a program approved by the Administrator, for each aircraft engine, propeller, rotor, and each item of emergency equipment required by this chapter. (b) For the purpose of this section, a manufacturer's maintenance program is one which is contained in the maintenance manual or maintenance instructions set forth by the manufacturer as required by this chapter for the aircraft, aircraft engine, propeller, rotor or item of emergency equipment. (c) For each single engine aircraft to be used in passenger-carrying IFR operations, each certificate holder must incorporate into its maintenance program either: (1) The manufacturer's recommended engine trend monitoring program, which includes an oil analysis, if appropriate, or (2) An FAA approved engine trend monitoring program that includes an oil analysis at each 100 hour interval or at the manufacturer's suggested interval, whichever is more frequent. (d) For single engine aircraft to be used in passenger-carrying IFR operations, written maintenance instructions containing the methods, techniques, and practices necessary to maintain the equipment specified in §§ 135.105, and 135.16 (e) No certificate holder may operate a single engine aircraft under IFR, carrying passengers, unless the certificate holder records and maintains in the engine maintenance records the results of each test, observation, and inspection required by the applicable engine trend monitoring program specified in (c) (1) and (2) |