Msg ID:
2749091 |
Force Trim function +1/-3
|
Author:CrashMeTwice
11/8/2022 8:03:21 PM
|
Almost impossible on finding consistent resources on the Force Trim function as it seems every helicopter is a bit different as I get different answers in the forums or on the web. I would like to know on how it works from a piloting perspective in the Mi-8, Mi-24, or KA-50 models. I would appreciate if a real life pilot would find the time answering some of my below questions related to the force trim function.
Are the following statements correct:
(a) If I engage the Force Trim function the cyclic locks into that position and this is the new 0,0 position.
(b) I can still make corrections but the range is now limited and if I exceed that limit, Force Trim will disengage.
(c) If I move the cyclic from that new 0,0 position I will feel a "spring" load, returning the cyclic back to the locked position if I would let go of it.
If the range (b) is limited, by how much? |
|
Return-To-Index
|
Msg ID:
2749125 |
Force Trim function +0/-2
|
Author:You Tube is your friend
11/9/2022 7:13:44 AM
Reply to: 2749091
|
https://www.youtube.com/watch?v=gKBLKjo2E7Y
|
|
Return-To-Index
|
Msg ID:
2749126 |
Force Trim function +0/-1
|
Author:You Tuber
11/9/2022 7:17:00 AM
Reply to: 2749091
|
https://www.youtube.com/watch?v=rt8-BkGShTw
|
|
Return-To-Index
|
Msg ID:
2749302 |
Force Trim function +3/-1
|
Author:cheap
11/12/2022 8:58:23 AM
Reply to: 2749126
|
For a basic force trim system find a UH-1 operators manual.After that you can get as complicated as you want.KISS. |
|
Return-To-Index
|
Msg ID:
2749679 |
Force Trim function +1/-2
|
Author:New IP Guy
11/16/2022 5:06:39 PM
Reply to: 2749302
|
Almost perfect reply. Who was the idiot that down voted you? If JH bans this IP, They will only be hurting themselves. |
|
Return-To-Index
|
Msg ID:
2749973 |
Well if I wanted to fly a video game that would +1/-1
|
Author:be very informative.
11/20/2022 5:17:11 PM
Reply to: 2749126
|
Not so much........ |
|
Return-To-Index
|