What’s their definition of a take off ? MD says ETL.

New Message Alert

Author: Undefined, but... Date: 12/22/2023 4:00:17 PM +0/-0 Show Orig. Msg (this window) Or In New Window

Torque Event

A significant change in power setting. The types of power setting changes are as follows:

A Ground-Air-Ground >(GAG) event (i.e., one takeoff plus the subsequent landing)

A load lift, such as a cargo hook lift operation, a water bucket lift operation, or an airborne replenishment of fixed internal or external reservoirs

Bell guys ? Factory guys ? +1/-0 Torque events. 12/22/2023 8:46:43 AM

Bell guys ? Factory guys ? +0/-2 what does the manual say 12/22/2023 8:52:32 AM

Bell guys ? Factory guys ? (NT) +0/-0 Fun one at party’s I bet. Smh 12/22/2023 8:58:45 AM

Bell guys ? Factory guys ? +3/-1 Other bells 12/22/2023 9:52:11 AM

Bell guys ? Factory guys ? +0/-1 nobody 12/22/2023 9:55:35 AM

Bell guys ? Factory guys ? +1/-4 it should now be apparent 12/22/2023 10:06:30 AM

Bell guys ? Factory guys ? (NT) +0/-0 It's only a lot of reading if you do it. 12/22/2023 2:02:23 PM

+4/-1 from 407 rfm 12/22/2023 11:31:55 AM

Bell guys ? Factory guys ? +0/-1 that appears 12/22/2023 1:33:52 PM

+3/-0 from 407 rfm take#2 12/22/2023 1:45:03 PM

What’s their definition of a take off ? MD says ETL. (NT) +0/-0 Hovering should not be a TO tq Ev 12/22/2023 3:46:31 PM

What’s their definition of a take off ? MD says ETL. +0/-0 Undefined, but... 12/22/2023 4:00:17 PM

+0/-0 You hosers! 12/25/2023 11:35:19 AM

Bell guys ? Factory guys ? +0/-0 GXi Maint. Manual 12/22/2023 3:52:26 PM

Maybe bell should say what a take off is. That ETL or that just a hover. (NT) +0/-0 Poor definition- MD500 must be past ETL. 12/22/2023 4:00:53 PM

Maybe bell should say what a take off is. That ETL or that just a hover. (NT) +0/-0 Poor definition- MD500 must be past ETL. 12/22/2023 5:12:45 PM

Bell guys ? Factory guys ? +0/-2 Anonymous 12/22/2023 7:23:13 PM

Bell guys ? Factory guys ? +0/-0 oldNtired 12/23/2023 1:21:05 PM

Bell guys ? Factory guys ? +0/-0 BigT 12/23/2023 2:48:09 PM

Bell guys ? Factory guys ? +0/-0 Bell Guy 12/29/2023 6:29:44 PM